E-link China Technology Co., Ltd.
E-link China Technology Co.,Ltd. Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Add to Cart
LNK-INJ601-60 is a product that provides a Hardened 10G High Power 60W PoE Injector. This device allows you to connect IEEE 802.3 af/at PoE devices such as cameras and access points with a non-PoE LAN switch within a distance of 30m. With this feature, you can easily integrate PoE devices to your network without having to purchase additional switches or upgrade existing ones.
Both the Ethernet port and the PoE Out port of this device support 10/100/1000/2.5G/5G/10G Base-T and are compliant with IEEE 802.3ab. The PoE Out port is also compliant with IEEE 802.3 at, which means that it can provide up to 60W of power to the connected PoE devices.
One notable feature of the LNK-INJ601-60 is that it provides an integrated power solution with a wide range voltage of 12~48VDC for high availability applications. This feature ensures that your PoE devices are always powered and connected to the network regardless of any voltage fluctuations or power outages.
The 12~48V DC Power Input converts direct current input to power the device. This configuration provides an efficient power source for devices that require DC input.
Furthermore, the device has 1 RJ45 Ethernet Data Input Port and 1 RJ45 Power Over Ethernet Output Port (Data + Power), making it a versatile tool. The RJ45 PoE output port utilizes IEEE802.3at Power over Ethernet, which supplies power to compatible devices.
In addition, the device is capable of supporting 10/100/1000/2.5G/5G/10G Base-TX, allowing versatile connection options for various devices.
The device also features extensive LED indicators for PoE diagnostics, making it easy to monitor the status of connected devices. In addition, the environmentally hardened device can operate in extreme temperatures as low as -40°C to 80°C (-40°F to 176°F).
Ethernet is a widely used networking technology that uses a protocol to define how data is transmitted over a network. It is known for its reliability and high-speed connectivity.
Ethernet has two power over Ethernet (PoE) standards - IEEE802.3af and IEEE802.3at. These standards allo power to be transmitted through Ethernet cables, which eliminates the need for separate power cables.
The processing type of Ethernet is forward, which can operate in half-duplex and full-duplex modes. Data is transmitted in a single direction in half-duplex, whereas data can be transmitted in both directions simultaneously in full-duplex mode.
The forward filter rate supported by Ethernet is 14,880,000pps (10Gbps). This ensures swift and smooth data transmission.
Ethernet supports cabling of 10/100/1000/2.5G/5G/10G Base-T, which requires Cat7 or above cabling.
The maximum distance Ethernet can support for Cat7 UTP is up to 30m.
Ethernet has 2x RJ45 connectors which are widely used for Ethernet networking.
The operating temperature range for Ethernet is -40°C to 80°C (-40°F to 176°F).
The storage temperature range for Ethernet is -40°C to 85°C (-40°F to 185°F).
Ethernet can operate in a relative humidity range of 5% to 95% non-condensing.
The mean time between failures (MTBF) for Ethernet is greater than 200,000hrs.
Ethernet requires an input power of 12~48VDC (Terminal Block).
The maximum power consumption for Ethernet is 65W.
Ethernet supports IEEE802.3af/at for PoE and has a power pin assignment of 4/5(+), 7/8(-). It can deliver a maximum power of 60W per port in alternative B mode.
Ethernet has dimensions of 95 x 70 x 30 mm and weighs 0.25Kg. It comes encased in an aluminum case and offers DIN-rail or wall-mount mounting options.
The Power Over Ethernet (PoE) Injector is a device that enables Ethernet devices to be powered through the Ethernet cable, eliminating the need for separate power cables. It is typically used in situations where it is not possible or practical to install power outlets near the Ethernet device.
Technical Support and Services:
Product Packaging:
The Power Over Ethernet Injector product will be packaged in a sturdy cardboard box with bubble wrap to protect it from damage during shipping. The product will be labeled with the product name, description, and barcode for easy identification. Shipping:
The product will be shipped via standard ground shipping. Customers can expect delivery within 5-7 business days of placing their order. Shipping costs may vary depending on the destination and quantity ordered.
| Model | Description |
| LNK-INJ601-60 | 12~48VDC Power Input Industrial 10G 60W PoE Injector 60W 802.3at. Default DIN-Rail Bracket installed; Wall Mount Bracket is included. |