E-link China Technology Co., Ltd.
E-link China Technology Co.,Ltd. Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Add to Cart
Overview
LNK-1200G-SFP is equipped with two 10/100/1000BASE-T RJ45 copper and one 100/1000BASE-X SFP fiber optic interface with built-in power supply. The media converter fulfills 100/1000M auto-sensation at fiber optic port, which increase the flexibility of the whole network.
The SFP slot is compatible with 100BASE-FX and 1000BASE-SX / LX / WDM through SFP fiber-optic transceivers.Customer can easily migrate from 100M fiber to Gigabit without changing customer premise equipment (CPE).
Start using the LNK-1200G-SFP in your current 100M infrastructure. When you are ready to move to Gigabit Ethernet, only change the central switch and all the LNK-1200G-SFP will automatically adjust to Gigabit speed.
This cuts the number of customer visits in half and reduce installation cost with 50%. No need for proprietary equipment, it is compatible with you existing Ethernet products and follows all the accepted standards.
Features
· 2-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
· 1 SFP interface, 100/1000BASE-X dual mode (auto detection)
· IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet standard compliant
· Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
· Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
· 9K jumbo frame size support
· LFP function support
· Supporting low-time lag transmission
· Built-in Power Supply
· Extremely low power consumption (less than 3W), reliable and stable performance
Technical Indexes
| Hardware Specifications | |
| Copper Interface | 2 x 10/100/1000BASE-T RJ45 TP |
| Auto-MDI/MDI-X, auto-negotiation | |
| Fiber Optic Interface | 1 x 1000BASE-SX/LX/BX SFP interface. |
| Compatible with 100BASE-FX SFP | |
| LED | ■ TP: 10M |
| ■ TP: 100M | |
| ■ TP: 1000M | |
| ■ FX: 100M | |
| ■ FX: 1000M | |
| ■ PWR | |
| Dimensions (W x D x H) | 71 x 94 x 26 mm |
| Weight | 200g |
| Power Requirements | AC 100-240V 50/60Hz 0.15A Max |
| Power Consumption / Dissipation | <3W |
| Network Cables | 10/100/1000BASE-T: |
| Cat3, 4, 5, 5e, 6 UTP cable (100 meters, max.) | |
| EIA/TIA-568 100-ohm STP (100 meters, max.) | |
| 1000BASE-SX: | |
| 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m (varying on SFP module) | |
| 1000BASE-LX: | |
| 9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/60/70/120 kilometers (varying on SFP module) | |
| 100BASE-FX: | |
| 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to | |
| 2 kilometers (varying on SFP module) | |
| 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (varying on SFP module) | |
| Standards Conformance | |
| Standards Compliance | IEEE 802.3 10Base-T |
| IEEE 802.3u 100Base-TX | |
| IEEE 802.3ab 1000Base-T | |
| IEEE 802.3z 1000Base-SX/LX | |
| Regulation Compliance | CE, RoHS and FCC |
| Environment | |
| Temperature | Operating: 0~50 degrees C |
| Storage: -10~70 degrees C | |
| Humidity | Operating: 5~95% (non-condensing) |
| Storage: 5~95% (non-condensing) | |
*Specifications subject to change without notice.
Ordering Information
| Item | Description |
| LNK-1200G-SFP | 2x10/100/1000BASE-T to 1x100/1000BASE-X SFP Media Converter with Built-in Power Supply, SFP slot compatible with 100BASE-FX and 1000BASE-X SFP, not including SFP modules |
