E-link China Technology Co., Ltd.
E-link China Technology Co.,Ltd. Professional Fiber Optical Communication and CCTV Security Transmission Product Manufacturer
Add to Cart
Overview
LNK-IMC1000P-SFP is a DIN rail type media converter that supports external SFP Modules and meets EN55022 standard. The Ethernet port support high power PoE (Power Sourcing Equipment) which complies with IEEE802.3at standard. It is a hardened grade product whose operating temperature range is -40°C to +80°C. LNK-IMC1000P-SFP supports 10/100/1000M Ethernet Port and 1000M SFP Port.
The Ethernet port supports both half-duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. In addition, with PoE reset function, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize.
Features
Warranty
Typical Application
Technical Indexes
| Ethernet | |
| Standards: | IEEE802.3ab 1000Base-T |
| IEEE802.3az Gigabit Fiber | |
| IEEE802.3af Power over Ethernet | |
| IEEE802.3at Power over Ethernet | |
| IEEE802.3x Flow Control | |
| Processing Type: | Forward |
| Half-duplex, Full-duplex | |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) |
| Cabling: | 1000Base-T: Cat5 or above |
| Maximum Distance: | Cat5 UTP up to 100m |
| Connector: | 1x RJ45 |
| Optical Port: | 1 x SFP 1000Base-X |
| Environmental | |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| Electrical and Mechanical | |
| Input Power: | 48VDC (Terminal Block) |
| Power Consumption: | 36W Max. 0.75A@48VDC |
| Standard: | IEEE802.3af/at |
| PoE: | |
| Port: | RJ45 |
| Max. Power per Port: | 30W Max per port (Alternative B Mode) |
| PoE Reset Function | Ideal for remotely resetting equipment, this configurable function performs a momentary power reset to the attached Powered Device (PD). When enabled, the media converter will, upon loss of fiber RX, turn off PSE output power supplied to the PD device for 2 seconds then turn the power back on and leave it on until such time that another fiber RX link is lost (after it was re-established). When disabled, a loss of fiber RX has no effect on PSE power to the PD device(s). |
| LED Indicators: | |
| Power: | Power Status |
| 1000TX: | Link/Activity, Speed |
| SFP: | Link/Activity |
| Dimensions (WxDxH): | 95 x 70 x 28 mm |
| Weight: | 0.25Kg |
| Casing: | Metal Case |
| Mounting Options: | DIN-Rail / Wall-mount |
| Regulatory Approvals | |
| ISO9001 | |
| FCC part 15, Class A | |
| EN55022:2006+A1: 2007 Class A | |
| Surge Protection: | |
| RJ45: 1KV | |
| Power: 500W | |
| ESD: 4KV/8KV | |
Ordering Information
| Model | Description |
| LNK-IMC1000P-SFP | Hardened 10/1001000BASE-TX to 1000BASE SFP Ethernet Media Converter with PoE+ |
| SFP Options | ► SFP option. Please select your SFP on our SFP Options Page (Industrial SFP). |
| ► SFP module is to be purchased separately. | |
| Mounting Options | ► Default DIN-Rail Bracket installed, Wall Mount Bracket is included. |
| Power Options | ► 75W/1.6A 48VDC Power Supply. Open Wire for Terminal Block |
| ► Power Supply is to be purchased separately. |