
Add to Cart
Managed Ethernet Switch Fiber Optic 24 10Gbps SFP+ ports + 4 Gigabit TP / SFP combo ports
Model: LNK-XS2404 Series
Overview
LNK-XS2404 Series Switches are 10Gb Data Center Switch. Provided high exchange capacity, the capacity of support ACL function based on three or four layers. Perfect safety control strategy and the CPU protection strategy (CPU protect policy) to improve the fault tolerance, ensure the stable operation of the network and link load. 6600 Series Switches adopts modular design, Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. To provide enough bandwidth, the user can according to demand to choose the appropriate 10G port in a flexible response network requirements. 6600 Series Switches Provided high backplane bandwidth , low latency, simple network management and other characteristics, located in density of the next generation of data center and cloud computing network access, can also be used for large Internet cafes, the core of enterprise network, metropolitan area network, gathering.
Features
High density 10G access, performance is remarkable
(1)With 490Gbps backplane bandwidth, the industry the highest performance (1U TOR);
(2)The layer 3 switching hardware routing, wire speed packet rate reached 364.56Mpps, L2 / L3 forward full speed;
(3)24 10Gb optical ports, the highest density (1U TOR), meet the demand of high-density 10G server access.
(4)Provide flexible network capacity;
(5)Has 4 1G photoelectric reuse ports, industry the only high density 10G switches provide more 1G port access.
Wind direction flexible choice, green and energy saving
(1)Flexible/before and after the first air duct design;
(2)Adopt strict before and after air duct design and support the hot and cold air duct is completely isolated, improve heat efficiency, satisfies the requirement of data center computer room design;
(3)Through selecting fan and power supply module, flexible support before, during and after the first air duct;
(4)Support power supply and fan redundancy configuration, ensure continuous business operation;
(5)Innovative energy-saving technology: using the latest energy-saving chip, fan speed control scheme of intelligent, supports real-time detection power consumption, reduce operational cost for the customer, create green data center.
Convenient in operation and maintenance
(1)Management support with Web, SNMP and telnet;
(2)Support XModem protocol, use TFTP/ZMODEM to software upgrading and BootRom upgrading;
(3)support SFP+, also backwards compatible XFP;
(4)To provide redundant power supplies, quick failover and fast connection, greatly increase the system reliability.
Product's Technical Parameters
Product Model | LNK-XS2404 Series (24+4+1+1 10Gigabit Data Center Switch) | |
Basic Featrue | ||
Fixed port | 24 10Gbps SFP+ ports + 4 10/100/1000Mbps TP/SFP combo ports | |
Console port | 1 | |
OOB management port | 1 | |
Backplane bandwidth | 490Gbps | |
Packet forwarding rate | 364.56Mpps | |
Jumbo frames | 9216 bytes | |
Transfer mode | Support store-forward mode and cut-through mode | |
IPv4/IPv6 route | 6k/8k | |
MAC address table | 128K | |
Packet Buffer | 9MB | |
VLAN ID | 4K | |
Flash | 32MB | |
Memory | 1GB DDR3 SDRAM | |
CPU | PPC Dual-core 800MHz | |
Soft Specification | ||
security feature |
IP+MAC+PORT+VLAN binding ARP inspection DoS defend port protect IP Source Guard binding |
|
VLAN |
Port based VLAN 802.1Q VLAN IP based VLAN MAC based VLAN |
|
MAC address table |
static MAC address table dynamic MAC address table |
|
Storm Control |
Broadcast Limit Multicast Limit DLF Limit Limit Speed |
|
Traffic Control |
Half-duplex control based on the back pressure type Full-duplex control based on the PAUSE frame |
|
Port Mirror | Support port mirror | |
Port management |
system info port Statistics config port port trunk port-isolate |
|
QoS |
IEEE 802.1Q Congestion mechanism Each port has 8 send queue mapping to 8 802.1p priority |
|
IP services |
Ping dectection DHCP Snooping |
|
Spanning Tree Protocol | MSTP(802.1s), STP, RSTP | |
Multicast management | IGMP Snooping frame | |
System management |
Support SNMP v1/v2/v3 Support Console Support TELNET Support WEB |
|
Remote Upgrade | Web host | |
Physical Characteristics | ||
External Dimension | 438.48mm*473mm*43.4mm | |
Power Supply Features | AC:90V~290V | DC:-38.4V~-72V |
Power | ≤230W | |
Indicator light | Power indicator, system, connection/sending and receiving instructions | |
Environment temperature/humidity | operating temperature:0°C~50°C(0m~1800m)storage temperature:-40°C~+70°C,relative humidity:5%RH~95%RH,Non-condensing | |
Authentication |
ROHS authentication European Community (CE) Electromagnetic Compatibility Directive:This equipment has been tested and found to comply with the protection requirements of European Emission Standard EN55022/EN60555-2 and the Generic European Immunity Standard EN50082-1. EMC: EN55022(1988)/CISPR-22(1985),class A EN60555-2(1995),class A EN60555-3 IEC1000-4-2(1995),4K V CD, 8KV, AD IEC1000-4-3(1995),3V/m IEC1000-4-4(1995),1KV – (power line), 0.5KV – (signal line) Federal Communications Commission (FCC) statement:This equipment has been tested and found to comply with the limits for a class A computing device pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment |