
Add to Cart
4-Channel Video with RS485 PTZ Data by Coaxial Cable Analog Video Multiplexer
Overview
E-link LNK-MV series video multiplexer bound the 2~6-ch video signal of the camera and the control signal of rs485 reverse controller in one coaxial cables transmission. The Video Multiplexer is composed of a Transmitter and a Receiver. From the receiver to the transmitter, it transmits 2~6 channel video signals through one coaxial cable to long distance. Besides, as you don’t need to install extra cable for data signals, you can save your money and time.
Features
Technical Indexes
Transmitter | ||||||
VIDEO 1 | VIDEO 2 | VIDEO 3 | VIDEO 4 | VIDEO 5 | VIDEO 6 | |
Central Frequency | 46MHZ | 38MHZ | 30MHZ | 30MHZ | 30MHZ | |
Signal Output Intensity | 105db | 105db | 103db | 102db | 102db | 102db |
Video Input Impedance | 75 Ohm (Unbalanced) | |||||
Video Input Amplitude | 0.8-1.5VPP | |||||
Video Compatible Format | PAL, NTSC | |||||
Video Interface | BNC | |||||
Signal Bandwidth | 8MHZ | |||||
Power Supply | DC12V/1A | |||||
Receiver | ||||||
Signal Output Amplitude | 0.9-1.1VPP | |||||
Output Polarity | Positive | |||||
Output Impedance | 75(Unbalanced) | |||||
Video Interface | BNC | |||||
Power Supply | DC12V/1A | |||||
RS485 Output Parameter(Switch with VIDEO 1) | ||||||
Quantity of Node Supported | 10 | |||||
Baud Rate | 300-57600bps | |||||
Interface | Double terminal block | |||||
Dimension | 158*124*39mm |
Ordering Information
LNK-MV201 | 2-Ch video converter transmitter and receiver for camera by one coaxial cable |
LNK-MV301 | 3-Ch video converter transmitter and receiver for camera by one coaxial cable |
LNK-MV401 | 4-Ch video converter transmitter and receiver for camera by one coaxial cable |
LNK-MV501 | 5-Ch video converter transmitter and receiver for camera by one coaxial cable |
LNK-MV601 | 6-Ch video converter transmitter and receiver for camera by one coaxial cable |