
Add to Cart
Overview
This unmanaged 16 port 10/100/1000Mbpst PoE switch with 250W internal power, also with 2 gigabit SFP slots,provides an easier installation way for your PoE devices (IP cameras,VoIP,wireless AP,etc.).And it can detect your PoE devices according to PoE standard.So the users do not need to worry about the PoE switch will damage their PoE devices.The max transmission distance is 100 meters with Cat5 cables.Ideally,shorter cable would reduce the power degradation over the cables; with high quality cables also can reduce power loss.Plug & play design make the installation quite easy,users do not need any configuration,which make this PoE switch a very good choice for IP cameras,wireless AP,VoIP users.
Features
Warranty: One Year
Technical Indexes
Standard | IEEE802.3i 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3x Flow Control IEEE802.3af/at Power over Ethernet IEEE 802.3,IEEE802.3ab,IEEE802.3az |
Network Interface | 10M/100M/1000Mbps PoE RJ45 Port(1~16) 10M/100M/1000Mbps Up-link Port(17~18) |
Performance specification | Bandwidth:32Gbps Network delay: 100 to 1000M bps:Max 20 microseconds(64Byte)· 1000 to 1000M bps:Max 20 microseconds(64Byte) MAC Address Capacity: 8K Frame Filtering and transmission rate: 10M Max 14,800pps 100M Max 148,800pps 1000M Max 148,8000pps |
LED Indicators | System, Power supply Speed: each port Link/ACT speed, 10/100M network mode, 1000M network mode, POE support POE supply |
Power Supply | Input: 100 - 240 VAC, 50 -60 Hz 250W internal power [power over :12(+) 36(-)]48VDC |
Environment | Operating Temperature: 0°C~50°C Storage Temperature: -10°C~70°C Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Dimensions | 440 x 350 x 45 mm (1U height) |
Weight | 5.5kg |
Certifications | FCC , CE, ROHS |
PoE Power Output | Per Port 48V DC, Max 25.5 watts |
Power Pin Assignment | 1/2(+), 3/6(-) |
Warranty | 1 years |
Application